product center-利来国际w66

rapid flow testing is suitable for mass production of the nozzle, valve, etc

flow range: 0～10l/min

this tester has a chinese & english bilingual interface, and is specially designed to measure the gross leakage

pressure range: -90kpa～990kpa

this universal leak tester is suitable for large, medium and small leakage detection

pressure range: -90kpa～990kpa

the tester is suitable for the conditions where low pressure leak test is required such as detection of gas stoves, water heaters, and medical infusion apparatus

test pressure range: 0.5～50kpa

the tester is suitable for the compound pressure leak detection of one device

test pressure range:
-100kpa～900kpa

this tester has no master

test pressure range:
99.9kpa～999kpa

linear fitting test method

test pressure range:
-99.9～5.1mpa

this multi-functional tester has a chinese & english bilingual interface

test pressure range:
-90kpa～20mpa

this multi-functional tester has a chinese & english bilingual interface

test pressure range:
-90kpa～3.5mpa

air pressure units can be centrally controlled by external circuit and it is suitable for integrated installation. multiple objects can be measured simultaneously.

test pressure range:
-100kpa～990kpa

this tester can simultaneously detect multiple artifacts (maximum 16 channels)

minimum detectable leak rate:
5×10^-8pam³/s

this tester uses mixed gas containing 5% hydrogen and 95% nitrogen as a tracer gas which is non-flammable safe gas approved by iso10156 : 2010.

minimum detectable leak rate：5×10-8pam3/s

this international first-class system can be customized with varied leak detection systems and fixture & tools

this spray can be used under - 45 ℃ using extrusion method

sensitivity: 1×10^-6pa.m³/s

the leak detection spray leaves a thin uniform film that accurately identifies any leaks of joints by the forming bubbles.

sensitivity:
1×10-6pa.m3/s

this system is suitable for small smd products and the detection process is fully automatic including fine detection, gross detection, and helium pressurization

test rate: 1.2～2sec/piece

this system is suitable for small smd products including resonators, oscillators, capacitor, and resistance, etc. 

test rate: 10～20sec/piece

this system is suitable for small smd products including resonators, oscillators, capacitor, and resistance, etc. 

test rate: 1～2.5 sec/piece

this system is suitable for sealed products including smd , saw and resonators.it is also a fine detection system of high efficiency and automation.

test rate: 1sec/piece

this system is suitable for small smd products and the detection process is fully automatic including fine detection, gross detection, and helium pressurization.

test rate: 1～2sec/piece